Pool Heat Pump Installation in Phoenix, AZ — Sold, Wired & Inspected
Want to swim in November? A pool heat pump is the cheapest way to heat a pool in Arizona, and the one thing every heat pump needs is a dedicated 50A circuit from your panel. Casther Electric runs the circuit, supplies the unit if you want us to, wires it, and pulls the permit so it’s inspected. Licensed AZ ROC #311594. The dedicated circuit typically runs $1,400–$1,750 up to 50 ft; the unit is quoted itemized on top.
Three Ways to Do It — Pick What You’re Comfortable With
- Circuit only. You buy the heat pump anywhere you like (online, Leslie’s, a local pool supply). We run the dedicated 50A line from your panel to the equipment pad, set the disconnect, tie in the bonding, GFCI-protect it per code, wire the unit, and pull the permit. Most jobs are done in one visit.
- We supply and wire it. Same job, plus we source the unit for you: heat-only or heat/cool, sized for your pool, warranty registered in your name, delivery coordinated with the install. The unit is quoted itemized at the current supplier price and paid by bank transfer or Zelle when you book; the plumbing tie-in is done by your pool company or our partner at a fixed price.
- Circuit now, unit later. Run the circuit this month so the pad is ready, and pick the unit when you’re ready. Your circuit price stays locked.
What the Heat Pump Circuit Includes
- Dedicated 50A, 240V circuit from your main panel or pool sub-panel, sized to the unit’s nameplate
- Conduit and copper conductors upsized for the run length (we show the wire and conduit size on your estimate)
- Weatherproof disconnect at the unit, within sight, as NEC Article 680 requires
- GFCI protection and equipotential bonding to the existing pool bonding grid
- Wire-up and start-up of the heat pump, permit and inspection
- Load check on your panel first — if the panel is full, we tell you before anything is ordered (see panel upgrades)
Heat-Only or Heat/Cool?
In Phoenix the heat/cool models earn their keep: they warm the pool in winter and chill it in July and August, when a backyard pool can reach bath-water temperatures. If you only swim spring and fall, a heat-only unit costs less. Either way, Arizona pools usually need a 110k–140k BTU unit; we size it from your pool’s gallons and whether it has a cover, not from a catalog default. Heat pumps run on electricity during the day, so they pair well with the SRP and APS daytime super off-peak plans.
Why the Electrical Matters
Most pool equipment pads were built with a pump and a light in mind. A heat pump is a 40–50A continuous load, and tapping it off an existing pool circuit is how breakers trip every afternoon and warranties get denied. A dedicated circuit with the right wire size, a disconnect within sight of the unit, and bonding tied into the pool grid is what the inspector checks and what keeps the unit running for years. We do pool electrical every day, so the heat pump goes in right the first time.
Prefer to talk? Call or text (602) 403-2443. Hablamos español.
Frequently Asked Questions
How much does it cost to install a pool heat pump in Phoenix?
The electrical side, a dedicated 50A circuit with disconnect, bonding, GFCI protection, wire-up and permit, typically runs $1,400 to $1,750 for runs up to 50 feet, more for longer runs or a larger conduit. The heat pump itself is quoted separately: we can supply it, or you can buy it anywhere and we wire it.
Do you sell pool heat pumps or only install them?
Both. We can supply heat-only and heat/cool units through our distributor, with the warranty registered in your name and delivery timed to the install. You are also welcome to buy the unit yourself; the circuit price is the same either way.
Can a heat pump run off my existing pool equipment circuit?
Almost never. A heat pump is a continuous 40 to 50 amp load and needs its own breaker, conductors sized for the run, and a disconnect within sight of the unit. If your pool sub-panel already has spare capacity at the pad, the job is a hook-up only and costs much less; we check this at the first visit.
Do I need a permit for a pool heat pump in Arizona?
Yes. A new 240V circuit for pool equipment requires an electrical permit and inspection in Phoenix-area cities. We pull the permit and meet the inspector as part of the job.
Who does the plumbing?
We handle everything electrical. The water connections at the pad are done by your pool company, or by our plumbing partner at a fixed price we show on the estimate, so you are not coordinating two trades yourself.
Pricing is for standard residential work in Greater Phoenix. Commercial pools and custom builds are quoted separately.
