EV Charger Installation in Phoenix, AZ
Level 2 home charging done right. Casther Electric installs Tesla Wall Connectors, universal J1772 chargers, and any 240V hardwired EVSE across Greater Phoenix. Licensed AZ ROC #311594, permitted and inspected. Typical install: $800–$2,500.
Chargers We Install
- Tesla Wall Connector
- Universal J1772 (Tesla, Ford, Rivian, GM, Hyundai, etc.)
- ChargePoint Home Flex
- Any 240V hardwired or NEMA 14-50 outlet install
A Clean, Code-Compliant Install
A proper EV charger install starts with a load calculation — not just running a wire. We confirm your panel can carry the new circuit (and upgrade it if it can’t), size the breaker and conductors correctly, run conduit cleanly along the wall or through the attic, mount the unit where you actually want it, and pull the permit so it’s inspected. Cutting corners on a 40–60A continuous load is how garages catch fire.
Cost Factors
Most installs land between $800 and $2,500. The big variables are the distance from your panel to the charger location, whether we route through finished walls or open attic, and whether your panel has room for the new circuit. Homes that need a panel upgrade first will see that quoted separately — see our panel upgrade page.
Frequently Asked Questions
How much does it cost to install an EV charger in Phoenix?
Most Level 2 home EV charger installations run $800 to $2,500 in the Phoenix area. The main cost drivers are the distance from your electrical panel to the charger, the wall and attic routing, and whether your panel has capacity or needs an upgrade first.
Do I need a permit to install an EV charger in Arizona?
Yes. A hardwired EV charger or a dedicated 240V circuit requires a permit and inspection in Phoenix-area municipalities. We pull the permit and handle the inspection as part of the install.
Can my electrical panel handle an EV charger?
Many can, but a Level 2 charger is a large continuous load (typically 40-60A). We run a load calculation before installing. If your panel is full or undersized, we’ll recommend a panel upgrade so the install is safe and to code.
Can you install a Tesla Wall Connector?
Yes. We install Tesla Wall Connectors, universal J1772 chargers, and any 240V EVSE. We size the circuit, run the conduit, mount the unit, and get it inspected.